Skip to content

How do I set the garage door opener in my Acura RDX?

To program your garage door opener, unplug your opener from inside of your garage. Go to your Acura, and hold the garage door remote close to your HomeLink buttons. The opener should automatically be recognized. When the light on your HomeLink system starts to blink, plug your garage door opener back in.


How do I program my 2018 Acura RDX garage door opener?

Hold down both the HomeLink button you want programmed and the button of your garage door opener. Keep both buttons pressed simultaenously until the indicator light in the HomeLink symbol flashes quickly. This should take around 30 seconds. Release both buttons.


How do I reset my Acura RDX HomeLink?

Before returning a leased vehicle or selling your vehicle, it is recommended that you clear any programmed HomeLink buttons. To do this, simply press and hold the outer two HomeLink buttons for 10 seconds, until the HomeLink indicator light changes from solid to blinking.


How do I program my Acura RDX 2017 garage door opener?


How do I program my Acura HomeLink without a remote?

No, you don’t need a remote, this is all in the car manual. You press the sync button on the back of the garage opener unit itself, then you hold the homelink button for the time specified in your manual, no remote required.


How do I pair my Acura garage door opener?

Press and hold the button on the remote and the HomeLink button at the same time. Then, while continuing to hold the HomeLink button, press and release the button on the remote every 2 seconds.

Also read:  What does ACC mean in an Acura?


How do I program my Acura RDX garage door opener 2014?


How do I connect my remote to my garage door opener?


How do I reset my Acura HomeLink?

■Programming a Button Erasing Button Memory To erase programming from the buttons, press and hold the two outside HomeLink buttons until the HomeLink indicator changes from orange to rapidly flashing green. This should take about 10 seconds. You should erase all programming before selling the vehicle.


How do I reset my HomeLink garage door opener?

Resetting Your HomeLink System To clear your vehicle’s HomeLink system of all programming settings, press and hold the outer two HomeLink buttons until the indicator light changes from solid to flashing rapidly (about 10 seconds).