Skip to content

How much is a serpentine belt in Acura TL?

The average cost for an Acura TL serpentine belt replacement is between $121 and $136. Labor costs are estimated between $55 and $69 while parts are priced at $67.


Is serpentine belt expensive to replace?

It’s very inexpensive to replace a serpentine belt, especially when compared to other vehicle parts. A typical serpentine belt generally starts at around $15 and goes up to $80 at most. Add to that the labor costs that can range from $75 and $120.


How much does it cost to replace the serpentine belt?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.


What is drive belt in Acura?

Our parts pros can tell you that the drive belt is a long, winding belt that sends power to the alternator, power steering pump, water pump, and air conditioning system.


What are the signs of a bad serpentine belt?

Common signs include a squealing noise from the front of the vehicle, power steering and AC not working, engine overheating, and cracks on the belt.


Can I change my serpentine belt myself?

Automatic belt tensioners, standard in most cars now, make changing a serpentine belt a simple DIY repair. Follow the clear photos and step-by-step instructions and you’ll be done in 15 minutes.

Also read:  Do steering wheel covers affect driving?


What happens if a serpentine belt breaks while driving?

If a serpentine belt breaks, a car won’t be drivable and will have to be towed. If the engine runs without a serpentine belt, it might overheat as the water pump will no longer work. A broken belt can also damage other parts.


How often should serpentine belt be replaced?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.


How long does it take to replace a serpentine belt?

It usually takes approximately thirty minutes for a mechanic to replace a serpentine belt. With the right tools and equipment, an auto mechanic can complete the process within thirty minutes to an hour.


Can I drive without a serpentine belt?

If you’re wondering whether or not you can drive your car without a serpentine belt, the answer is no. There are many dangers to driving without a serpentine belt. A car can only take out so much slack from other components before they fail and stop working altogether.


How many years does a serpentine belt last?

Under ideal circumstances, you’ll get anywhere from 50,000 to 100,000 miles of reliable service from a typical serpentine belt. In terms of years, it may be anywhere from 4 years to an entire decade before you’ll need to replace your serpentine belt.


What is the average life of a serpentine belt?

Also read:  How much does an alternator cost for a 2013 Chevy Malibu?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles. Pretty impressive.


Is a fan belt the same as a serpentine belt?

Fan belts – also known as serpentine belt or accessory drive belts – take the engine’s rotation and use it to power the: engine water pump, fan, power steering pump, air conditioning compressor, alternator, supercharger and others.


When should I replace my serpentine belt?

Under ideal circumstances, your car’s serpentine belt should last 60,000–100,000 miles. It’s important to replace this belt as part of your vehicle’s scheduled maintenance (even if it looks okay) to avoid it breaking while you’re on the road.


How do you fix a squeaky serpentine belt?


How do I test my serpentine belt?


What causes serpentine belt to wear out?

Serpentine belt problems usually result from one of three causes: a defective belt tensioner; misalignment of a pulley; or, defective bearings in the tensioner, idler, or one of accessories driven by the belt (including the water pump).


What does it sound like when a serpentine belt goes bad?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. If a car has a hydraulic power steering pump, the steering will become stiff.

Also read:  How much is a Chrysler alternator?


Will serpentine belt make noise?

Common Serpentine Belt Problems Worn/Cracked Serpentine Belt – Serpentine belts have grooves which fit into grooves in the pulleys. Over time, the friction wears down these grooves, resulting in a loose fit. A worn belt can, therefore, begin to slip, which is one of the causes the squeal.


Should I replace tensioner with serpentine belt?

You should expect to replace your belt tensioner in the 40,000-70,000 mile range. It is also customary to swap more than one part simultaneously, usually a worn-out pulley from other systems and even the serpentine belt itself.