Skip to content

What does A2 mean Acura?

What is an Acura A2 service code? A2 means that it’s both time to replace your oil, and that you either need to inspect your drive belt, replace your air cleaning element, or change out your pollen filter.


What is a B1 Service Acura?

The B in this Maintenance Minder code represents a mechanical inspection and oil and filter change. The “1” in B-1 represents that it’s time for the vehicle’s tires to be rotated. B-1 service also targets the brake system for inspection and repairs as needed.


What does service due soon A3?

Let’s say your Honda Maintenance Minder Message display an illuminated orange wrench along with the code “A3”. “A” is a Main Item which tells you that your engine oil should be replaced. “3” is a Sub Item which indicates that it’s time to replace your vehicle’s transmission fluid and transfer fluid (if equipped).


What is A14 service for Acura?

What do they do for an A14 service? From what I remember, A services entail oil change, oil filter change, tire rotation, and check tire pressure. If this is what you need, you could do this yourself for around 30 bucks if you do all the labor.


How do you reset the maintenance light on a Acura?

Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II). Do not start the engine. Hold the SELECT and RESET buttons until the indicator resets, hold for about 10 seconds. Turn the ignition off and then start the engine to verify the indicator has been reset.

Also read:  Does 2012 Acura TL have Bluetooth audio?


How do you reset the oil life on a Acura TL?

Press and hold the SELECT and RESET buttons on the instrument panel. Turn the ignition to position (II) do not start engine. Hold the SELECT and RESET buttons until the indicator resets, 10 seconds. Turn ignition off and then start the engine to verify the indicator has been reset.


What is service B1 Acura TL?

This includes inspecting your tie rod ends, suspension, brake hoses, exhaust, fuel system, driveshaft boots, and steering gearbox. If you have further questions or want a full breakdown of the Acura RDX B1 service description, our team is standing by to offer solutions for all of your car care concerns.


What is Acura service code b16?

The Acura MDX b16 maintenance code is “replace rear differential fluid” in addition to tire rotation and “B service”.


What is B13 service for Acura TL?

Acura B13 service requires: Oil and oil filter change. Transmission fluid flush. Front transfer case oil change.


How do you reset the service light on a Acura TL?

Press and hold the SELECT and RESET buttons on the instrument panel. Turn the ignition to position (II) do not start engine. Hold the SELECT and RESET buttons until the indicator resets, 10 seconds. Turn ignition off and then start the engine to verify the indicator has been reset.