Skip to content

What is a 5×120 bolt pattern?

The 5×120 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (120), the notional circle determined by the center position of the studs. The 5×120 bolt pattern is common to Acura, BMW, BMW Alpina, BYD, Bentley, Buick and Cadillac vehicles.


Who uses 5×114 3 bolt pattern?

The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.


Is 5×120 the same as 5×5?

They are not interchangeable. You should not use 5×4. 75 adapters. In addition, many 5×120 factory wheels use special 14×1.


What bolt pattern does BMW use?

Nearly all BMWs have 5 lug bolts in a 120mm bolt circle. Beginning with the G01 7-series chassis in 2009, all G-chassis use a 5×112 bolt pattern – the same number of lug bolts but in a 8mm tighter circle. This is also the spec used by Audi, VW, and Mercedes.


What car has a 5×115 bolt pattern?

Wheels with a 5×115 bolt pattern can be found on a ton of great vehicles, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs and more.


Who uses 5×120 bolt pattern?

Common vehicles that have a 5×120 bolt pattern include Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, Volkswagon. Use the following table to see a list of vehicles with a 5×120 bolt pattern.

Also read:  Does a Chrysler 200 have an alternator fuse?


What vehicles use a 5×4 75 bolt pattern?

The answer: many classic muscle cars—this bolt pattern isn’t common on most modern vehicles. But you’ll still see it on contemporary Corvettes and old school hot rods. We’re talking classic American muscle, including the Bel Air, Camaro, Chevelle and Impala, as well as the Pontiac Trans Am, GTO and Firebird!


Is 5×4 5 the same as 5×114 3?

5×114. 3 wheels are just the metric variant of 5×4. 5 inch wheels. It’s a simple conversion from metric to standard.


What is a 5×4 5 bolt pattern?

Small Ford Pattern | 5 on 4.5 inches The 5×4. 5-inch bolt pattern is typically known as a “small Ford” pattern and can also be listed as 5×4-1/2 inches.


Does 5×108 fit 5×114 3?

Our Wheel Adapters are made of CNC 6061-T6 lightweight aluminum and include M12*1.5 hardware, grade 10.9. These will allow 5×108 Ford owners to fit 5×114. 3 wheels to their vehicle without needing to change their wheel hubs.