Skip to content

Where is the fuel pump relay on a 2002 Acura TL?

The 2002 Acura TL 3.2L fuel pump relay is located in the driver side interior fuse box. It is in the lowest cavity and has an ampere rating of 15.


What is the PGM FI relay?

Description. The PGM-Fl main relay actually contains two individual relays. This relay is located at the left side (LHD) or right side (RHD) of the cowl. One relay is energized whenever the ignition is on which supplies the battery voltage to the ECM, power to the fuel injectors, and power for the second relay.


How do you bypass a Honda main relay?


Where is the fuse box located in a 2003 Acura TL?


Where is the fuse box for a 2003 Acura TL?

Passenger compartment The interior fuse boxes are located on each side of the dashboard. To open an interior fuse box, pull the bottom of the cover open, then take it out of its side hinges by pulling it toward you.


Where is the fuel pump relay located on a 2001 Acura CL?

More often the Fuel Pump Relay can be found inside of the fuse box, which is located in the engine bay. It is usually found next to the AC compressor control relay.


How do I test a fuel pump relay?


Where is the fuel pump located on a Acura?

The fuel pump access panel is located on the floorboard underneath the rear seats. Remove any plastic trim pieces that cover the seat mounting bolts. These are easily removed by gently prying upwards with a flat head screwdriver or small pry bar.

Also read:  What does replacing upper control arms do?


What does PGM-FI do?

Operation. The PGM-FI system relies on a piezoelectric sensor to indirectly measure the air quantity, and interprets the data using performance maps. Fuel is injected intermittently into the inlet ports. The PGM-FI also has a trailing throttle fuel cutoff and a self-diagnosis system.


How do you check a relay?

The only tool required to check a relay is a multimeter. With the relay removed from the fuse box, the multimeter set to measure DC voltage and the switch in the cab activated, first check to see if there are 12 volts at the 85 position in the fuse box where the relay plugs in (or wherever the relay is located).